0

New DEPOSIT® range: Offset tanks for treatment or storage of polluted effluents

In order to build more quickly your remotepits in substation, we launch the DEPOSIT® range.

We have developed DEPOSIT® pits to meet all the requirements of rapid construction, permanent assurance of their watertightness and 

Solution:

The DEPOSIT® range has been specially designed to meet the 5 issues of a buried remote pit for oil power transformer using the principle of fluid separation. We guarantee:

 - The total retention of the dielectric oil,
 - Water and oil tightness,
 - Decantation and separation of water and oil,
 - The evacuation of rainwater and extinguishing water (firemen, sprinklers, flood) in case of emergency,
 - And the resistance to hot transformer oils.

In addition to retention volumes, the DEPOSIT® range is available in 3 standard configurations:

 - Single chamber remote tank (Mono Volume): DEPOSIT®-MV range,
 - Single-chamber remote tank for the storage of emergency fire water (Deluge Water): DEPOSIT®-DW range,
 - Triple volume tank: DEPOSIT®-TV range.

Made of reinforced fibreglass and double-walled, the pits are constantly pressurised and monitored by a pressure gauge to detect any leak or loss of watertightness. In the event of a rupture in one of the walls, the pressure drop between the two layers allows the problem to be identified from the surface.

In order to guarantee a high level of reliability and quality, all our pits are manufactured according to ISO 9001 standards and meet the requirements of NF EN-13121, NF-EN 976-1, NI 50-20-04(4-0), NF-EN ISO 14125 and UNE-EN ISO 75-30.

At the end of the manufacturing process, the tightness is tested in the factory by applying a negative pressure in the double wall of each DEPOSIT® pit in order to create a vacuum and measure the possible leakage: this air test method is much more reliable than a water test.

If you are interested in our DEPOSIT® range, please contact us and visit our product page

DEPOSIT