BDRG-2 Simple retention tank with 2 removable walls

0,00 

Electrical transformer tank

The BDRG-2 range comprises several standardised references of removable monobloc tanks with 2 removable walls (1 width, 1 length). SANERGRID®‘s BDRG2 range is designed to meet the regulatory, technical and environmental requirements for dielectric oil transformers from 160 to 2500 kVA.

+

Description

Description

Description of the BDRG2 standard range:

  • S235 steel tank, sheet thickness from 20 to 30/10
  • 2 removable walls: 1 long and 1 wide to be bolted on with pan bolts on lock nuts (supplied)
  • Technical seal in special SILGRID™ silicone with high temperature resistance and hot dielectric oil on all removable parts of the tank, to be applied after installation of the transformer in the tank and closure of the fronts in order to guarantee complete sealing of the tank
  • Unit quality inspection before leaving the factory, with the bins arriving pre-assembled with their bolts and nuts pre-installed.
  • Earthing output available at 2 opposite points (terminal not supplied)
  • Double-sided watertight welding, welding process regularly tested by third-party inspection bodies using the ARDROX 996 P2 dye penetrant method or equivalent.

By default, our BDRG-2 containers are hot-dip galvanised to guarantee superior internal and external performance compared with C3 paint. They are certified hot-dip galvanised in accordance with ISO EN1461-2022.

The BDRG-2 range comprises 14 standardised drip trays for ECODESIGN Tier 2 distribution transformers. This means that the required retention volume can be met, as well as the length and width of your transformers. Please contact us with your transformer dimensions.

Please note that since the AFNOR update in 2021 on the NFC13200, simple retention tanks not equipped with fire-stop shutters on the inside and whatever the power, are no longer authorised. We recommend that you consult us if you have any problems with heightening or dimensions, and that you contact our inspection body, such as APAVE, SOCOTEC or Bureau Veritas (or other), to obtain the necessary exemptions from your insurance organisations.

Accessories and options

Depending on the configuration of your project, the BDRG range can evolve into several custom designs thanks to our in-house design office and our dedicated manufacturing plants:

  • Addition of rolling UPNs inside the tray in length or width: BDRG-ROLL range
  • Design of the tank with 4 detachable walls: BDRSA range
  • Design of the tank with 1, 3 or 4 detachable walls panels depending on your transformer installation requirements in the BDRG drip tray: BDRG-SP range

Several options are also available for special applications

  • PETRO PIT kit, when the tray is used outdoors to allow continuous drainage of rainwater. In this case, we recommend using TRT® all-welded facade ranges.
  • SANERVIB anti-vibration pads to be fitted at the bottom of the tank to reduce transformer noise and vibration.
  • Inner tracks in UPN BDRG-ROLL
  • Change of surface treatment to paint class C3, C4 or C5
  • Galvanic anti-corrosion treatment C5H or CX in GALVAGRID®
  • Locking brackets for transformer wheels SANERBLOCK™
  • Bracket for fixing to the ground.

Technical data

Additional information

Conditions of use

indoor, outside

Material

steel

Fronts

Removable

Fire resistance

YES

Use and maintenance

Before installing the tank:

  • Make sure that the ground surface is smooth, flat, clean and, above all, large enough to take the weight of the transformer and the tank.
  • Check that the positioning of the load pick-ups from the floor to the tray is appropriate, aligned and correctly dimensioned.
  • If the tanks are stored outside, they must be emptied regularly, and not handled with water inside.

Installing the tank:

The tank must be unloaded using suitable handling equipment. Once in its final position, install the transformer in the drip tray, close the front panels with pan bolts and apply the SILGRID silicone sealant cartridge to ensure a complete seal.

Maintenance:

Regular visual inspection of the equipment should cover the following points:

  • Tightness on detachable walls, wall penetrations and accessories and/or plugs properly screwed in if present.
  • Integrity of the tank walls, no deformation or damage (knocks, impacts, rust, etc.).
  • State of ageing of the hot-dip galvanising protective layer and potential touch-ups.
  • The frequency of these checks depends on the constraints of each site, depending on its degree of corrosion, dirtiness, presence of organic matter, etc.

Please refer to the user manual for further details. Failure to follow good operating practices and to deal with anomalies and defects in the field are the responsibility of the owner of the equipment.

Additional information

Our tanks comply with European regulation EU No 548/2014 also known as ECODESIGN on the implementation of directive 2009/125/EC, which lays down ecodesign requirements for the placing on the market or putting into service of transformers with a power rating of at least 1 kVA used in 50 Hz electricity transmission and distribution networks or for industrial applications. Called ECODESIGN Tiers 1 (2015) and ECODESIGN Tiers 2 (2021).

Our standard range of SANERGRID BDRG2 spill containment bunds complies with French, European and international standards and recommendations concerning the containment of dielectric fluids, fire risk management, the management of pollutants and rainwater in high-voltage substations and the protection of people and property.

  • French standards NF C13-100 and NF C13-200 prevent the electrical risks of overcurrents, earthing problems, fire, short-circuits and lightning, and soil and environmental pollution.
  • Standard NF EN 61936-1, relating to the design and installation of electrical installations, which requires watertight retention representing 100% of the volume of oil used, and provides the necessary indications for pre-dimensioning retention volumes and surfaces, fire safety distances and systems, and rainwater management associated with the outdoor storage of hydrocarbons.
  • CIGRE 23-07 and IEEE 980 recommendations concerning the use of fireproof covers for transformer pits and tanks, as well as guidance on the pre-sizing of indoor and outdoor retention tanks and pits.
  • Our tanks are designed and manufactured in accordance with the European norms and standards of EUROCODE 3 (Calculation of steel structures).
  • Our manufacturing plants are certified ISO 9001 for their quality management process and IS0 14001 for their environmental management process, and are all based in Europe to encourage short supply chains and limit carbon emissions.
  • Our French and European sites enable us to guarantee that all our steel comes from European production, which is made up of over 50% recycled steel in order to limit the over-exploitation of resources and limit the carbon emissions linked to our manufacturing activities SANERGRID.
  • Rainwater drainage and hydrocarbon pollution when used outdoors:

Thanks to the SPI anti-hydrocarbon water filter system, the tank is empty of water most of the time and ready to receive hydrocarbons. In compliance with the French Water Act (decree 77-254), the water discharged from the tanks is not contaminated with more than 5 ppm of hydrocarbons, in accordance with standard EN 858-1 (“light liquid separation installations”).

SPI® filters are regularly tested by independent laboratories: SANERGRID Bureau Veritas COFRAC I.D. certified report: 003606/2776443/1/1/1 in 2015 (France), SPI Phoenix I.D. laboratory reports: AR67044 from 2002, 2004, 2005, 2009, 2018, 2022 (USA), TÜV report Nr 2432974 in 2016 (Germany), NUA -Z-11895-1/1-2016 report. (Non-exhaustive list)

You may also like…